Little bit of progress, apart from being crook.
Pulled apart the rear end looking for a brake line leak. Turns out that one of the lines had a pinhole leak. Found that im definitely using my rear brakes too:
[IMG]http://gallery2.plebeians.net/d/32699-2/1000001072.JPG[/IMG]
Sending off the diff to get reset too, may as well while its out.
Built up all of the exhaust, but had to send it off for welding because my stupid TIG isnt holding an AC arc on stainless. Will have to experiment more later.
[IMG]http://gallery2.plebeians.net/d/32691-2/1000001071.JPG[/IMG]
Mounted up the brake reservoir:
[IMG]http://gallery2.plebeians.net/d/32695-2/1000001073.JPG[/IMG]
Oh and started machining out the recess for the brake caliper mounts on the lathe:
[IMG]http://gallery2.plebeians.net/d/32705-2/1000001075.JPG[/IMG]
Still hoping to get a mill soon so i can finish them off. I tried using a mates mill, but its really setup for cylinder heads and blocks, so its a ton bigger than i need and the milling bit is way bigger than the biggest radius i have.
Need to install the wideband, and finish putting in the wiring for the gauges. Should be pretty much ready to put the engine back in on the weekend.