So I sorted through that big box of bits, and came up with a smaller box of bits:
[IMG]http://gallery2.plebeians.net/d/30109-1/IMG_1133_s.jpg[/IMG]
Thats all the fittings and bits for both the Supra and the Sprinter, as well as a few other little bits.
I havnt had a chance to do the oil cooler bits just yet, as ive been doing other things, mainly on the Exhaust side of things. Finished tacking up the exhaust today:
[IMG]http://gallery2.plebeians.net/d/30127-1/IMG_1139_s.jpg[/IMG]
Few little bits im not entirely happy with, but i can fix those easily when i weld it up fully. But overall it has gone together pretty well in the end.
Also when i was out in ‘Lizbeff before a meeting this morning i ducked into UPullIt while i was killing some time and found this:
[IMG]http://gallery2.plebeians.net/d/30121-1/IMG_1137_s.jpg[/IMG]
Factory MX73 lip which fits pretty well on the MA61, just had to trim off part of the inside to get the overlap right.
Lastly ive started fitting up the strut brace too:
[IMG]http://gallery2.plebeians.net/d/30124-1/IMG_1138_s.jpg[/IMG]
Not too much to go now. Just have to assemble a small high pressure fuel hose, and fit the oil cooler stuff and then i should be ready for first start.